株洲电动伸缩门良心厂

高速公路防眩网表面处理注意事项：1.边框钢管和钢板网片的所以焊接点、锌渣需打磨找平，避免有大量氧化铁渣、锌渣残存，影响表面热浸塑处理光滑度。2.整张防眩网要保持水平垂直、网面平整，保证网孔均匀、焊接牢固，保证在高温浸塑炉加热的程序中不会烧断、变形。3.高速公路防眩网不能经受雨水淋湿，避免在上塑过程中出现大面积气泡而造成附着面不均匀，产出防眩网次品。4.在准备出炉的过程中要把握准确的时间，使浸塑工作点产生降低到最小程度。

Anti dazzle note highway net surface treatment: 1. frame steel and steel mesh welding slag, so points need to polish leveling, avoid a lot of oxidation slag, slag residual, hot dip treatment effect of surface smoothness. 2., the whole anti glare network to maintain the level of vertical, flat surface, to ensure uniform mesh, welding firm, to ensure that the high temperature plastic furnace heating procedures will not burn, deformation. 3., the highway anti glare nets can not withstand the rain wet, avoid in the process of plastic appear large area of bubbles and cause uneven adhesion surface, output anti glare net defective products. 4., in the preparation of the process, to seize the accurate time, so that the plastic work point to a minimum extent.