| 防眩板的基本结构 |
| 添加时间：2019/12/25 16:26:33 浏览次数： |
| 防眩板的基本结构是把方形型钢作为纵向骨架，把一定厚度、宽度的板条按一定的间隔固定在方形型钢上。防眩板厚度视采用材料不同而不同，也应根据防眩板是否受力而有变化。在每个独立结构段内，一般有两块板为承力结构板与护栏板连接固定。 The basic structure of the anti glare plate is to take the square section steel as the longitudinal framework, and fix the slats of certain thickness and width on the square section steel at certain intervals. The thickness of the anti glare plate varies according to the materials used, and it should also vary according to whether the anti glare plate is stressed. In each independent structural section, there are generally two plates which are connected and fixed by the bearing structural plate and the guardrail plate. 防眩板及其连接体的尺寸应结合结构和景观等因素确定。一般板条厚度为2.5～4.0mm，板宽为8～25mm；方形钢的外形尺寸可为（40mm×40mm）～（65ram× 65ram），其壁厚可为2～3mm。 The size of the anti glare board and its connector shall be determined in combination with the structure, landscape and other factors. Generally, the thickness of lath is 2.5-4.0mm, and the width of plate is 8-25mm; the overall dimension of square steel can be (40mm × 40mm) ～ (65ram × 65ram), and its wall thickness can be 2-3mm. |
| 上一页 桥梁防护网特点 |
| 下一页 桥梁防抛网介绍 |
Copyright © 技术支持：遨游网络