| 停车场系统的道闸的该如何选择 |
| 添加时间：2023/5/15 14:04:04 浏览次数： |
| 道闸是停车场系统的重要组成部分，所有车辆的出入均由道闸控制。因此，道闸的选择非常重要。所以，今天我们要讲述的是停车场系统的道闸的该如何选择。 The gate is an important component of the parking lot system, and all vehicle access is controlled by the gate. Therefore, the selection of gate is very important. So, today we are going to talk about how to choose the gate of the parking lot system. 1、道闸外壳建议选用2mm以上厚度的冷轧钢壳，因为道闸外壳有一个基本的要求就是要坚固耐用。并且还需要汽车金属烤漆工艺进行喷漆，这样才能达到防腐、防水、防锈的目的。 1. It is recommended to use a cold-rolled steel shell with a thickness of 2mm or more for the gate shell, as a basic requirement for the gate shell is to be sturdy and durable. And it also requires the automotive metal baking process for painting, in order to achieve the goals of anti-corrosion, waterproofing, and rust prevention. 2、停车场系统的道闸撞到行人或车辆的情况时有发生，所以为保障停车场*，避免撞到行人或车辆，避免人身和经济损失。我们应选择具有地感防砸、遇阻回弹、行车优先防砸、防砸胶条防砸等功能的智能防砸道闸，并且要保证技术先进成熟。 2. The gate of the parking lot system often collides with pedestrians or vehicles, so to ensure the safety of the parking lot, avoid hitting pedestrians or vehicles, and avoid personal and economic losses. We should choose intelligent anti impact road gates with functions such as ground sensing anti impact, rebound when encountering obstacles, priority anti impact when driving, and anti impact rubber strip anti impact, and ensure that the technology is advanced and mature. 3、道闸需要有基础的手动操作功能，比如遇到停电等一些紧急情况，便可以用钥匙能打开道闸，也可以手动抬起刹车拉杆释放车辆。 3. The barrier gate needs to have basic manual operation functions, such as in emergency situations such as power outages, which can be opened with a key, or the brake lever can be manually lifted to release the vehicle. 4、有防腐、防水、防锈的内部扭力结构的道闸才能使用长久，这样的道闸往往采用镁铝合金电镀，可长期防锈。 4. The internal torsion structure with anti-corrosion, waterproof, and rust proof features can only be used for a long time. Such gates are often electroplated with magnesium aluminum alloy, which can prevent rust for a long time. 5、门杆需要有反光效果，防止晚上看不清楚撞到门杆。当然，如果道闸安装在比较*的场所，还需要讲究外观，美观时尚，颜值高是基本的要求。 5. The door pole needs to have a reflective effect to prevent it from colliding with the pole at night. Of course, if the gate is installed in a relatively convenient location, it is also necessary to pay attention to its appearance, aesthetics and fashion, and high appearance is the basic requirement. 6、为防止汽车撞到道闸时不会被刮伤，需要选择采用防砸胶条和中间铝合金制成的刹车杆，而且这样的刹车杆材质轻，对电机的负荷较小，州苗木 保定电动门 保定空压机 化粪池模具 微型蠕动泵 保定强夯 收费岛模具可以延长道闸电机的使用寿命。 6. To prevent the car from being scratched when it collides with the barrier, it is necessary to choose a brake rod made of anti impact rubber strip and aluminum alloy in the middle. Moreover, this brake rod material is light and has a small load on the motor, which can extend the service life of the barrier motor. |
| 上一页 智能停车场系统的统计汇总功能强大 |
| 下一页 车牌识别系统的应用前景 |
Copyright © 技术支持：遨游网络